# routinglib Routinglib is a library module that offers pathfinding capabilities to other modules. The code for this library was initially written for the [Drag Ruler module](https://foundryvtt.com/packages/drag-ruler) and has been extracted into a library to open up the opportunity of using pathfinding to all modules. ## Should I install this module? This module does not provide any user-facing features on it's own. Only install this module either if another module you're using has declared this module as a dependency or if another module you're using indicates that it will unlock specific features if routinglib is installed. If neihter of those apply to you, there is nothing to gain by installing routinglib. ## Capabilities The following table lists the capabilities and limitations of routinglib with respect to grid types and difficult terrain. Note that you need to install Terrain Ruler if you would like routinglib to take difficult terrain into account. | Square or Hex grids | Gridless -|-|- Without difficult terrain |

Fast
Will always find the shortest possible path, if a path exists
Can only calculate paths where each waypoint is snapped to the grid
Tokens of even size cannot squeeze through a 1 square hallway

Fast on small scenes, slow on scenes with thousands of walls
Will find paths that are close to the shortest possible path
Tokens aren't able to squeeze through hallways smaller than they are themselves

With difficult terrain |

Somewhat fast for 1x1 tokens, getting increasingly slower with token size
Will always find the shortest possible path, if a path exists
Can only calculate paths where each waypoint is snapped to the grid
Tokens of even size cannot squeeze through a 1 square hallway

| Currently unsupported, terrain will be ignored on gridless scenes ## Using routinglib in a module *This section is intended for module authors that would like to integrate routinglib's pathfinding capabilities into their modules. If you aren't a module author, you can stop reading here* ### Knowing when routinglib is ready Before routinglib can perform any pathfinding operations, it needs to perform some initialization steps, that can only be performed once all of routinglib's resources have loaded and Foundry's canvas is ready. To make it easy to determine when you can start requesting routing calculations, routinglib will fire the `routinglib.ready` hook. You can receive the hook like this: ```javascript Hooks.on("routinglib.ready", function () { // You can start issuing pathfinding commands now }); ``` ### The coordinate system used by routinglib Whenever routinglib expects a coordinate as a parameter or returns coordinates in a result, the coordinates will be in the format specified in this section. Each coordinate is an object that contains a `x`and a `y` attribute. Those attibutes are given as follows: - On *gridded* scenes (square and hex), `x` and `y` will be given as grid cells. - On *gridless* scenes, `x` and `y` will be given in pixels. ### Calculating a path You can ask routinglib to calculate a path by invoking ```javascript routinglib.calculatePath(from, to, options) ``` This function will initiate a pathfinding calculation. Because this calculation can take a non-negligible amount of time - depending on the complexity of the active scene - the calculation is performed asynchronously in the background. The function will return a promise, that yields information about the calculated path. The parameters of this fuction are: - **from** is a [coordinate](#the-coordinate-system-used-by-routinglib) indicating the start point of the route - **to** is a [coordinate](#the-coordinate-system-used-by-routinglib) indicating the end point of the route - **options** *(optional)* is an object that can contain several properties to fine-tune the behavior of routinglib. See below for a [list of possible options](#options) The function will return a promise. If no path is found, the promise will resolve to `null`. If a path is found, the promise will resolve to an object containing two properties: - **path** an array of [coordinates](#the-coordinate-system-used-by-routinglib) that represent the waypoints of the calculated path. This path includes the start and end point passed into the parameters. - **cost** indicates the length of the path. If difficult terrain was considered during the pathfinding operation, this cost will include cost incurred by walking over difficult terrain. #### Options - **token** If the route requested from routinglib is supposed to be walked by a specific token, pass that token via the *token* option. This allows routinglib to take token-specific properties like token size, token elevation and more into account. - **ignoreTerrain** *default: false* Set this option to `true` if you'd like routinglib to ignore terrain for the requested route. - **elevation** This parameter allows specifying an elevation at which the routing should be performed. If this parameter is set, the elevation of the token passed into the *token* option is being ignored. - **maxDistance** will limit the routing algorithm to paths that have at most the length indicated by this parameter. If a path cannot be found within the specified distance, the function's promise will resolve to *null*. Specifying this option will cause the routing algorithm to finish faster because it doesn't need to consider all the available routes. #### Options exclusive to the gridded pathfinder - **interpolate** *default: ture* If this option is set to `true` the pathfinder will try to emit as little waypoints as possible. If it's set to `false`, the pathfinder will emit a waypoint for every grid cell that the path passes trough. #### Cancelling a running pathfinding operation If for you no longer need the path you've requested, you should cancel the pathfinding operation. This improves the overall performance of your module - especially if you're scheduling many pathfinding operations in rapid succession. A running pathfinding operation can be cancelled by calling ```javascript routinglib.cancelPathfinding(promise) ``` The **promise** parameter expects the promise of the pathfinding operation that you'd like to cancel. The promise expected here is the promise that was returned by the `calculatePath` function. After you've cancelled a pathfinding operation, the promise belonging to that pathfinding request will become invalid and will never resolve and should thus be discarded. ### Blocking path calculation **Using the function documented in this section can cause Foundry to freeze for considerable amounts of time when used on complex scenes. Only use this function if you there's no way around it.** If possible at all, please use [the async function](#calculating-a-path) instead. If you absolutely cannot use an async function, routinglib offers a blocking alternative. ```javascript routinglib.calculatePathBlocking(from, to, options) ``` The function will behave exactly the same as [the async function](#calculating-a-path) (see it's documentation for details), with the following exceptions: - This function will not perform the path calculation in the background. Instead, it will cause Foundry to freeze until either a path is found or the routing algorithm can guarantee that no path exists. - This function will not return a promise. Instead, it will directly return either *null* or the result object. - To call this function, you must specify the *maxDistance* option. This is a safeguard to reduce Foundry freezes to a minimum. If the *maxDistance* option is not specified, the function will not perform any calculations, but will abort with an exception. ## Building routinglib Since this module contains WebAssembly components written in rust, building a release of this module isn't as trivial as just packaging up the contents of this folder. To aid the process of developing and releasing routinglib, a few helper scripts are included in the repository. ### Setting up a basic development environment If you're either planning to build the WebAssembly components to start writing code to contribute to this module, or if you want to build a custom release of routinglib, you'll need a rust development environment für WebAssembly in both cases. First, you need to install a rust compiler. The rust installer `rustup` and instructions on how to install rust can be found on (https://rustup.rs/). Once rust is installed, you need several components that allow you to build WebAssembly from Rust code. If you're on a Unix-Like system, you can simply execute the script `install_dev_dependencies.sh`, which will take care of installing those for you. Alternatively, if you're on Windows, you can run the commands listed in the shell file manually to install those components. You're now ready to build routinglib. ### Building a custom release To build a custom release, simply execute the Python script `build_release.py`. The script will take care of building the rust code in a Release configuration to WebAssembly and will package all the necessary files into a zip file that can be installed in Foundry VTT. After the script has finished, the zip file can be found in the folder `artifact`. ### Building the WebAssembly component for development purposes If you're interested in modifying routinglib, you'll need to pouplate your working directory with the required WebAssembly files. To do this, execute `./build_wasm.py --debug`. This script will build the rust code and will store the resulting WebAssembly into the `wasm/` folder, which is the location foundry expects them to be in when it tries to load those components. The pyton script will remain active after the build has finished and will watch for changes in the Rust code. If the Rust code is modified, the script will automatically re-build the WebAssembly, to ensure you're always testing with the most up-to-date code as possible.

c	File Name	Size	files	T	Date
zip	js/	28295	7	---	2026-08-07 08:57:02
zip	wasm/	74476	2	---	2026-08-07 08:57:02
-	CHANGELOG.md	1503		md	2026-08-07 08:57:02
-	LICENSE	1071		%	2026-08-07 08:57:02
-	README.md	10015		md	2026-08-07 08:57:02
-	module.json	916		json	2026-08-07 08:57:02

🌲 / foundry13data Data modules routinglib

control-panel